Next Back to the selection

Q-Eye Radar

Stationary non-contact flow meter

Technical specifications
  1. Sensor:
    1 x velocity
    1 x water level (external 4-20 mA sensor)
  2. Frequency: 24 GHz
  3. Beam Width: 11° at -3dB
  4. Range: ± 0.05 m/s, to ± 15 m/s
  5. Resolution: 1 mm/s; min. wave height 3 mm
  6. Display: 4 lines, 20 characters
  7. Keyboard: 4 keys
  8. Data logger: 16 GB MicroSD card
  9. Communication: RS-485, Modbus (RS-232 or RS-485), Wireless LAN, 4G (LTE) / 3G (HSPA+) / 2G, Ethernet 10/100 Mbps
  10. Inputs: max. 4 x 4-20 mA, 2 x digital
  11. Outputs: max. 4 x 4-20 mA, 4 x relay, 2 x pulse
  12. Power supply: 9-36 V DC or 100-240 V AC (50/60 Hz)
  13. Protection class housing: IP66 (NEMA 4)
  14. Enclosure: Aluminum, wall mounted
DOWNLOADS
Related products
Back | Next Back to the selection

Q-Eye Radar Portable

Mobile non-contact flow meter

Technical specifications
  1. Sensor:
    1 x velocity
    1 x water level (about external 4-20 mA sensor)
  2. Frequency: 24 GHz
  3. Beam width: 11° at -3dB
  4. Range: ± 0.05 m/s, to ± 15 m/s
  5. Resolution: 1 mm/s; min. wave height 3 mm
  6. Display: 4 lines, 20 characters
  7. Keyboard: 4 keys
  8. Data logger: 16 GB MicroSD card
  9. Communication: Wireless LAN, 4G (LTE) / 3G (HSPA+) / 2G
  10. Inputs: max. 2 x 4-20 mA
  11. Power supply: 2 x rechargeable batteries, hot swappable, 24 V DC +/- 10% (option)
  12. Protection class housing: IP67
  13. Enclosure: HPX® Resin
DOWNLOADS
Back | Next Back to the selection

Q-Eye PSC

Stationary area velocity flow meter for partially filled or pressurized pipes and open channels. Advanced Pulse-Coherent cross-correlation technology for capturing entire velocity profiles.

Technical specifications
  1. Sensors:
    Ultrasonic velocity sensor (up to 3 sensors possible)
    Water level sensors (hydrostatic, ultrasonic or radar)
  2. Number of measurement cells: up to 32
  3. Velocity range: ± 5.3 m/s
  4. Typical accuracy flow: ± 2 % of reading, depending on site conditions
  5. Display: 4 lines, 20 characters
  6. Keyboard: 4 keys
  7. Data logger: 16 GB MicroSD card
  8. Communication: RS-485, Modbus (RS-232 or RS-485), Wireless LAN, 4G (LTE) / 3G (HSPA+) / 2G, Ethernet 10/100 Mbps
  9. Inputs: max. 4 x 4-20 mA, 2 x digital
  10. Outputs: max. 4 x 4-20 mA, 4 x relay, 2 x pulse
  11. Power supply: 9-36 V DC or 100-240 V AC (50/60 Hz)
  12. Protection class housing: IP66 (NEMA 4)
  13. Enclosure: Aluminum, wall mounted
DOWNLOADS
Back to the selection

Insertion sensor

The Q-Eye PSC insertion sensor uses advanced Pulse-Doppler technology. The velocity profile of the entire cross-section is captured in up to 18 measurement cells. The insertion sensor is used when the pipe is only accessible from the outside. This sensor is for use in full pipes or in partially filled pipes in combination with an integrated pressure transducer. The installation is carried out by means of a 1.5” ball valve into existing pipework.

The insertion sensor is mounted flush with the inner pipe wall, allowing pipes to be cleaned without removal of the sensor. Additionally, the flow profile is not altered by the sensor itself. Should the sensor ever need to be removed, it can be done under process conditions thanks to the integrated ball valve.

Technical specifications
  1. Sensor:
    Velocity sensor for partially and fully filled pipes incl. ball valve
    Optional with integrated pressure transducer for level measurement
  2. Frequency: 1 MHz
  3. Range:
    ‒ Velocity: ± 5.0 m/s
    ‒ Level (pressure transducer): 0…0.2 bar or 0…10 bar
  4. Uncertainty velocity:
    ± 0.03 m/s from -1.5 m/s to +1.5 m/s
    ± 2 % of reading from -5.0 to -1.5 m/s and +1.5 to +5.0 m/s
  5. Uncertainty pressure transducer:
    ‒ Linearity: 0.5 % FS (0.2 bar) or 0.25 % FS (10 bar)
    ‒ Error band 0 to 50 °C: max. 1.5 % FS (0.2 bar) or 0.5 % FS (10 bar)
  6. Cable length: 10 m incl. (max. 80 m)
  7. Material: Stainless steel 1.4301 (AISI 304)
  8. Dimensions Diameter: 38 mm (1.5”)
Related products
Back to the selection

Area velocity sensor

The submersible area velocity sensor uses advanced Pulse-Coherent cross-correlation technology. The velocity profile of the entire cross-section is captured in up to 32 measurement cells, providing best-in-class resolution of flow. The sensor measures both flow velocity and water level in order to calculate total flow volume. The integrated temperature sensor is used for automatic data correction and provides enhanced statistical information, e.g. for infiltration studies. 

With its dimensions of only 19 x 24 x 129 mm, the area velocity sensor causes no interference in the flow profile, which results in more accurate velocity measurements, especially in low-flow situations. 

Technical specifications
  1. Measures flow velocity, water level and temperature 
  2. Frequency: 1 MHz 
  3. Range:
    ‒ Velocity ± 5.0 m/s
    ‒ Water level 0.04-1.3 m,
       expandable with external  4-20 mA level sensor
    ‒ Temperature: -60 °C to +150 °C (linearized: 0°C to +60°C) 
  4. Accuracy:
    ‒ Velocity: ± 0.03 m/s from -1.5 m/s to +1.5 m/s
    ±2 % of reading from -5.0 bis -1.5 m/s and +1.5 bis +5.0 m/s
    ‒ Level: ± 2 mm
    ‒ Flow: Typically ± 2 %, depending on site conditions
    ‒ Temperature: ± 0.5 K for 4 °C to 57 °C 
  5. Min. particle concentration: > 50 ppm 
  6. Operating temperature: -15 °C to +50 °C (non-freezing) 
  7. Material: Stainless steel (1.4571, AISI 316 Ti), PEEK (piezo cover) 
  8. Protection class: IP68 (48 h at 50 kPa, NEMA 6P) 
  9. Approval: ATEX Zone 1; II 2G EEx e ib IIB T (option for stationary Q-Eye PSC) 
  10. Dimensions: 129 x 24 x 19 mm (L including cable connector x W x H)
Related products
Back | Next Back to the selection

Q-Eye PSC Portable

Portable Pulse-Doppler system

Technical specifications
  1. Sensor:
    1 x velocity
    1 x water level
  2. Pulse: 1 MHz
  3. Number of cells: up to 18 cells
  4. Range:
    velocity ± 5.3 m/s
    water level 0.04-1.3 m
    expandable via external 4-20 mA sensor
  5.   Accuracy:
    ‒ Velocity
    ± 0.03 m/s from -1.5 m/s to +1.5 m/s
    ±1 % of reading from -5.2 to -1.5 m/s and +1.5 to +5.2 m/s
    ‒ Level
    ± 0.5 % FS (1.5 m)
    ‒ Flow
    typically ± 2 %, depending on site conditions
  6. Display: 4 lines, 20 characters
  7. Keyboard: 4 keys
  8. Data logger: 16 GB MicroSD card
  9. Communication: Wireless LAN, 4G (LTE) / 3G (HSPA+) / 2G
  10. Inputs: max. 2 x 4-20 mA
  11. Power supply: 2 x rechargeable batteries, hot swappable, 24 V DC +/- 10% (option)
  12. Protection class housing: IP67
  13. Enclosure: HPX® Resin
DOWNLOADS
Back | Next Back to the selection

Area velocity sensor Portable

The submersible area velocity sensor uses advanced Pulsed-Doppler technology to directly evaluate velocity profiles. The sensor measures both flow velocity and water level in order to calculate total flow volume.

With its dimensions of 15 x 25 x 108 mm, it is the smallest sensor of this type currently available. Its low profile means less interference, which results in more accurate velocity measurements, especially in low-flow situations.

Technical specifications
  1. Frequency : 1 MHz
  2. Range:
    Velocity ± 5.3 m/s
    Water level 0.04-1.3 m
    expandable with external 4-20 mA level sensor
  3. Accuracy:
    ‒ Velocity
    ± 0.03 m/s from -1.5 m/s to +1.5 m/s
    ±1 % of reading from -5.2 bis -1.5 m/s and +1.5 bis +5.2 m/s
    ‒ Level
    ± 0.5% FS (1.5 m)
    ‒ Flow
    typically ± 2 %, depending on site conditions
  4. Cable length: 10 m incl. (max. 80 m)
  5. Particle concentration: > 50 ppm
  6. Material: Epoxy
  7. Protection class : IP68 (48 h at 50 kPa, NEMA 6P)
  8. Approval: ATEX Zone 1; II 2G EEx e ib IIB T (option for stationary Q-Eye PSC)
  9. Dimensions: 108 x 25 x 15 mm (L x W x H)
Related products
Back | Next Back to the selection

RV11 radar velocity sensor

Bi-directional non-contact velocity measurement. Inclusive ball-joint mount for quick and easy installation.

Technical specifications
  1. Frequency: 24 GHz
  2. Beam width: 11° (-3dB)
  3. Range: ± 0.05 m/s to ± 15 m/s
  4. Resolution: 1 mm/s, min. wave height 3 mm
  5. Uncertainty velocity: ± 0.5 % of reading ± 0.01 m/s
  6. Uncertainty flow: Typically < 5 % of reading, depending on site conditions
  7. Min. distance to surface 0.2 m
  8. Max. distance to surface 10 m
  9. Protection class: IP68 (48 h at 50 kPa, NEMA 6P)
  10. Operating temperature: – 40 °C to + 85 °C
  11. Dimensions: 242 mm (L mounting), 100 x 100 mm (W x H sensor)
Related products