Arrière | Suivant Retour à la sélection

Insertion sensor

The Q-Eye PSC insertion sensor uses advanced Pulse-Doppler technology. The velocity profile of the entire cross-section is captured in up to 18 measurement cells. The insertion sensor is used when the pipe is only accessible from the outside. This sensor is for use in full pipes or in partially filled pipes in combination with an integrated pressure transducer. The installation is carried out by means of a 1.5” ball valve into existing pipework.

The insertion sensor is mounted flush with the inner pipe wall, allowing pipes to be cleaned without removal of the sensor. Additionally, the flow profile is not altered by the sensor itself. Should the sensor ever need to be removed, it can be done under process conditions thanks to the integrated ball valve.

Technical specifications
  1. Sensor:
    Velocity sensor for partially and fully filled pipes incl. ball valve
    Optional with integrated pressure transducer for level measurement
  2. Frequency: 1 MHz
  3. Range:
    ‒ Velocity: ± 5.0 m/s
    ‒ Level (pressure transducer): 0…0.2 bar or 0…10 bar
  4. Uncertainty velocity:
    ± 0.03 m/s from -1.5 m/s to +1.5 m/s
    ± 2 % of reading from -5.0 to -1.5 m/s and +1.5 to +5.0 m/s
  5. Uncertainty pressure transducer:
    ‒ Linearity: 0.5 % FS (0.2 bar) or 0.25 % FS (10 bar)
    ‒ Error band 0 to 50 °C: max. 1.5 % FS (0.2 bar) or 0.5 % FS (10 bar)
  6. Cable length: 10 m incl. (max. 80 m)
  7. Material: Stainless steel 1.4301 (AISI 304)
  8. Dimensions Diameter: 38 mm (1.5”)
Related products
Arrière | Suivant Retour à la sélection

Q-Eye PSC

Système Doppler à impulsion stationnaire

Données techniques
  1. Les capteurs :
    Capteur de vitesse à ultrasons (jusqu’à 3 capteurs possibles)
    Capteurs de niveau d’eau (hydrostatiques, ultrasoniques ou radar)
  2. Nombre de cellules : jusqu’à 32 cellules
  3. Vitesse d’écoulement : ± 5,3 m/s
  4. Précision typique du débit : ± 2 % du relevé, en fonction des conditions locales
  5. Affichage LCD : 4 lignes, 20 signes
  6. Clavier : 4 touches
  7. Mémoire : carte micro SD 16 GB
  8. Interfaces : RS-485, Modbus (RS-232 ou RS-485), Wireless LAN, 4G (LTE) / 3G (HSPA+) / 2G, Ethernet 10/100 Mbps
  9. Entrées : max. 4 x 4-20 mA, 2 x numérique
  10. Sorties : max. 4 x 4-20 mA, 4 x relais, 2 x fréquence
  11. Alimentation : 9-36 V DC ou 100-240 V AC (50/60 Hz)
  12. Boîtier de protection : IP66 (NEMA 4)
  13. Boîtier : boîtier mural en aluminium
DOWNLOADS